Pulp Mills and the Environment: an Annotated Bibliography for Nothern Alberta
Waste Management
Beak Consultants Ltd. Stripping Kraft Foul Condensates with Waste Gases. Ottawa: Environment Canada, Environmental Protection Services, Water Pollution Control Directorate, 1982. Brewer, Heather M. Anaerobic Technology: A review of Research, Development and Demonstration Activity in the Agrifood and Pulp and Paper Industries. Ottawa: Industrial Programs Branch, Environmental Protection, Conservation and Protection, Environment Canada, 1988.
Exner, Jurgen H., editor. Solving Hazardous Waste Problems: Learning From Dioxins. Washington, D.C.: American Chemical Society, 1987. From a symposium held by the American Chemical Society in April 1986. Thirty-one papers on distribution, toxicology, risk assessment and risk management.
Freeman, Harry M., editor. Incinerating Hazardous Wastes. Lancaster, PA.: Technomic, 1988. A review of the thermal mechanisms for destruction of certain hazardous wastes.
Freeman, Harry M., editor. Innovative Thermal Processes for Treating Hazardous Wastes. Lancaster, PA.: Technomic, 1986. Covers such techniques as: wet oxidation, fluidized bed incineration, pyrolysis, electric reactors, plasma systems, chemical transformations and advanced incinerators.
Freeman, Harry M., editor. Standard Handbook of Hazardous Waste Treatment and Disposal. Montreal: McGraw-Hill, 1988. Good overview of many topics, including: dioxins, various thermal processes, aerobic and anaerobic decomposition, landfill, and sampling.
Jank, B.E. et al. An Assessment of Kraft Bleachery Effluent Toxicity Reduction Using Activated Sludge. Ottawa: Water Pollution Control Directorate, 1977.
Malinen, Raimo, Nils-Erik Virkola and Esko Turunen. Effluent Characterization and Treatment of Chemithermomechanical Pulping. Helsinki, Finland: University of Helsinki, Laboratory of Pulping Technology, 1985.
Metcalf and Eddy Inc. Wastewater Engineering: Treatment, Disposal, and Reuse, 3rd ed. Revised by George Tchobanoglous and Franklin L. Brown. New York: McGraw-Hill, 1991. Text on treatment techniques for municipal wastewater.
National Council of the Paper Industry for Air and Stream Improvement. A Review of the Status of Development and Application of Groundwater Models for Prediction of Contaminated Transport of Materials Derived from Land Disposal of Solids and Liquids. New York: The Council, March 1984. Also available as Technical Bulletin 425.
National Council of the Paper Industry for Air and Stream Improvement. Landfill Gas Generation, Migration, Monitoring and Control. New York: the Council, May 1984. Also as the Council's Technical Bulletin 431. Reed, Sherwood C., E. Joe Middlebrooks, and Ronald W. Crites. Natural Systems for Waste Management and Treatment. Toronto: McGraw-Hill, 1988. Mathematical factors for designing waste water treatment facilities, such as sludge ponds.
Reid, Ian C. Policy for In-Plant Control of Adsorbable Organic Halides in Kraft Pulp Mill Effluent. Edmonton: Alberta Environment, Standards and Approvals Division, 1989. Operating policy.
Springer, Allan M. Industrial Environmental Control: Pulp and Paper Industry. New York: John Wiley and Sons, 1986. General overview.
Science Outreach Athabasca - September 27, 2012
